This article serves as a table of contents for all Installation-related articles to simplify navigation of these sections.
Installation - Debian OS
Articles in this section pertain to the installation of the Debian Operating System required for ggRock.
Prepare Debian 10 OS Installation Media
This article describes the procedure for burning/writing a recommended Debian OS Netinstall ISO image to a USB Flash Drive.
Install the Debian 10 OS on Your Server
This article describes the procedure for installing the recommended Debian 10 OS Netinstall ISO image.
Appendix I: Multiple Server Network Interfaces
This article describes alternate steps for network configuration if your server has multiple Network Interface Cards installed.
Appendix II: Debian OS Installation to a Software RAID Array
This article describes alternate steps for disk configuration if you elect to install the Debian OS to a software-based RAID1 Array.
Appendix III: Install the GRUB Boot Loader
This article describes necessary steps for installing and configuring the GRUB boot loader to a software-based RAID1 array.
Install Debian OS (Deprecated)
This article helps guide the user through the first step of the installation - Debian (Linux) OS
Remote Access Configuration (Static IP)
This article explains how to set up a Static IP address for remote access to the server
Debian OS Installation special case, step 11 - Install Debian to a RAID array (Deprecated)
This article helps guide the user through installation of Debian (Linux) OS on a RAID array
Debian OS Installation special case, step 5 - Configure network (Deprecated)
This article expands on nuances of network configuration during Debian (Linux) OS installation
Installation - ggRock Server Application
Articles in this section pertain to the installation and configuration of the ggRock server application.
Install the ggRock Server Application
This article describes necessary steps for installing the ggRock application for the first time.
First-time Setup and Accessing the ggRock Server Application
This article describes necessary steps for accessing the ggRock Server Application (ggRock Web UI) for the first time.
Configure the ggRock Array
This article describes necessary steps for first-time ggRock Array setup and configuration.
Configure Client Machines for Network/Diskless (PXE) Boot
This article describes necessary steps for first-time system BIOS configuration for Network/Diskless (PXE) boot.
Create, Configure, and Test ggRock Images
This article describes necessary steps for first-time ggRock Image setup and configuration.
Install ggRock (Deprecated)
This article helps guide the user through the second step of the installation - installing ggRock application package
Configure ggRock (Deprecated)
This article explains how to configure basic aspects of ggRock: Configure Array, import and set up Images and get Machines to boot