ggCrypto: Settings Page Overview

ggCrypto: Settings Page Overview Settings Page Overview Tristam Janus Sales

If you cannot see this page in admin.ggleap.com, please try in adminbeta.ggleap.com

Can access mining configs permission is required to access this page

 

a. Opens Manage overclocking profiles modal - on this modal, we can add GPU profiles with the manual configuration.

  • To add a new profile just click on the new profile button

  • GPU profiles can only be applied to PCs that matches the GPU model

b. Enable/Disable Mining for all machines, or by individually sliding the toggles per machine

c. Overclock profile drop down list - where all created profiles can be set, Auto is equal to the value of Optimized Safe Settings (enabled/disabled)

d. Mining Schedule - Select when do you want your PCs to mine. atm only 100% of the time they are ON but not being used is available.

e. Payment details - where the payments after each cycles will be sent. (Can access crypto payment details + Can access mining configs permissions are required to access this panel)

f. Opt-out ggCrypto - if you want to opt-out ggCrypto and uninstall the functionality from your PCs.

g. Apply changes button - everything that we changed on this page will not be applied immediately, so if you made changes please make sure to apply the changes.

h. Discard button - to ignore all the changes that were made on this page that was not saved.

GPU PROFILES GUIDE

WARNING: You should never attempt overclocking unless you are extremely familiar with the hardware.

 

  1. Profile name - Name of the profile

  2. Graphics card

    1. note that only the GPU models that has been detected by ggLeap in your center will appear here.

    2. This profile can only be applied to PCs that matches the GPU model

  3. Core Clock - Set GPU core clock in MHz (0 for default). For Nvidia cards use relative values (e.g. -300 or +400)

  4. Memory Clock - Set GPU memory clock in MHz (0 for default). For Nvidia cards use relative values (e.g. -300 or +400)

  5. Power Limit - Set GPU power limit in % (from -50 to50, 0 for default)

    1. The actual value here that will be passed is how far away is it from 100%

      1. Example: value is 100, value that will be passed is 0

      2. Example:. value is 95, value that will be passed is -5

      3. Example: value is 105, value that will be passed is 5

  6. Fan Control Minimum - Set fan control min speed in %

  7. Fan Control Maximum - Set fan control max speed in %

  8. Core temperature target - Set fan control target temperature

  9. Core temperature limit - Set fan control max temperature. If this feature is not supported by the driver, Core temperature limit is set to the same temperature instead.

  10. Memory temperature Target - Set fan control target video memory temperature (can be used only on GPUs that report the VRAM temperature). Example: 83 will keep the GPU memory temperature at or bellow 83C by increasing the fan speed as necessary. This can be combined with Core temperature target, and Junction temperature Target.

  11. Memory temperature Limit - Lower GPU usage when VRAM temperature is above n deg C (can be used only on GPUs that report the memory temperature). The default value is 0, which means do not lower the usage regardless of the GPU memory temperature. If you are using both Memory temperature Target and -Memory temperature Limit options, the temperature in Memory temperature Target should be lower than the Memory temperature Limit to avoid throttling the GPUs without using the fans to properly cool them first.

  12. Junction temperature Target - Set fan control target hotspot (junction) temperature (can be used only on GPUs that report the junction temperature). Example: 75 will keep the junction temperature at or bellow 75C by increasing the fan speed as necessary. This can be combined with Core temperature target, and Memory temperature Target.

  13. Junction temperature Limit - Lower GPU usage when hotspot (junction) temperature is above n deg C (can be used only on GPUs that report the junction temperature). The default value is 0, which means do not lower the usage regardless of the GPU hotspot temperature. If you are using both Junction temperature Target and Junction temperature Limit options, the temperature in Junction temperature Target should be lower than the Junction temperature Limit to avoid throttling the GPUs without using the fans to properly cool them first.

     

    Notes:

    • Memory Temperature will only apply on RTX 3080 and RTX 3090 GPUs.

    • Junction Temperature will only apply on RTX 3080 and RTX 3090 GPUs.

    • When applying profiles, there will be a 1-3mins polling before the settings gets applied.

    • If the PC is not mining after a profile has been applied, pls try to adjust the values of each property by increments.