PCs with local drive

Updating PCs in this setup is straightforward and can be done even if there are users on the client PCs. User session will not be interrupted and update will commence after the user logs out.

  1. In the web admin, go to Settings > Client configuration > Version.
  2. Select the PCs that you want to update or click "Select all" button.
  3. Click "Change version" button after selecting PCs.
  4. In the pop-out window, select version type that you want to use and click "Apply".
  5. Restart or boot PCs to begin update.

Alternatively, you can also update the client version via the Dashboard.

Update a single PC

  1. Select the PC that you want to update.
  2. Click the three dots button on the right and go to Settings > Change client version on the drop down menu.

3. On the pop-out menu, select the version and click "Apply".

Update several PCs

  1. Select the PCs that you want to update or click the box on the top left side of the PC list to select all.

2. Several menus will appear on the top of the PC list. Go to More actions > Change client version.

3. On the pop-out menu, select the version and click "Apply".

PXE environment

Please make sure to follow the steps below for updating client version in diskless/PXE setup.

  1. Go to your PXE's client manager and select a PC that will be used as "super client".
  2. In the web admin, go to Settings > Client configuration > Version.
  3. Select the PC that you assigned as "super client" and update it to the version that you prefer. Restart PC and wait until it is updated.
  4. Once the "super client" is updated, confirm that the client updated to the correct version and check if it is working properly.
  5. After making sure that the client is updated and working, turn that PC off and save the image in the PXE's client manager.
  6. Go back to the web admin and update the rest of the PCs.

To view this article in a separate browser tab, click here.

Did this answer your question?