Special case Step 5 - Configure network

If your server has several network interfaces you may face and additional prompt

Step 5.1. Several network interfaces.

If your server setup has several network interfaces you will see this step.
The installer will pre-select the interface that is connected to a cable.
Simply click Continue

Step 5.2. Autoconfiguration has succeeded

You will see this prompt for a brief second if you have selected an interface that is properly set up in your LAN.

After this you will be back on the main scenario at Step 5. Provide your hostname

Step 5.1.1. Network autoconfiguration failed

You will see this prompt if you have selected an interface with no cable attached.

  • Please try another interface
  • If you have tried all interfaces - check your NIC ports
  • If the cable is attached check your switch settings
  • If all else fails - contact ggRock support
Did this answer your question?