> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://help.ggcircuit.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# ggRock Client Machine boot stuck on "Filename: http://xxxxxxxx... [connecting]

ggRock Client Machine boot stuck on "Filename: [http://xxxxxxxx...](http://xxxxxxxx...) [connecting] This article describes a scenario in which client PCs fail to boot due to an incorrect IP address

### **Problem**

ggRock Machines hang at [connecting] during the boot process.

It may also be noted that the IP address of the server in the "Next Server:" field is incorrect.

### **Solution**

![](https://storage.crisp.chat/users/helpdesk/website/-/a/f/d/6/afd6941e8bc7d800/undefined-mar-31-2025-02-31-11_1xy7syx.png)

### Re-run ggrock-linux-configurator

1. Access the server console via a direct connection to the server, SSH, or via Debian Control Panel.

2. Log in with the root user, or another admin user on the system.

![](https://storage.crisp.chat/users/helpdesk/website/-/a/f/d/6/afd6941e8bc7d800/undefined-mar-31-2025-02-31-10_1l0fohl.png)

3. Enter the ggrock-linux-configurator command, then press <Enter>.

![](https://storage.crisp.chat/users/helpdesk/website/-/a/f/d/6/afd6941e8bc7d800/undefined-mar-31-2025-02-31-10_1kufw62.png)

4. At the "Welcome" dialog, press <Enter> to proceed with configuration.

![](https://storage.crisp.chat/users/helpdesk/website/-/a/f/d/6/afd6941e8bc7d800/undefined-mar-31-2025-02-31-11_uxktqx.png)

5. At the "Install packages" dialog, press <Enter> to install packages from the Debian "contrib" repository.

![](https://storage.crisp.chat/users/helpdesk/website/-/a/f/d/6/afd6941e8bc7d800/undefined-mar-31-2025-02-31-11_106ryga.png)

6. At the "Enable repositories" dialog, press <Enter> to enable the required repositories.

![](https://storage.crisp.chat/users/helpdesk/website/-/a/f/d/6/afd6941e8bc7d800/undefined-mar-31-2025-02-31-12_1jmdc65.png)

7. At the "IP adddress" dialog, select the primary IP address of your server, then press <Enter> to confirm.

![](https://storage.crisp.chat/users/helpdesk/website/-/a/f/d/6/afd6941e8bc7d800/undefined-mar-31-2025-02-31-12_1268d6t.png)

8. If desired, at the "Bridge configuration" dialog you may choose to configure your server for virtual machines at this time by pressing <Enter> to confirm, otherwise select "No" here and press <Enter> to confirm.

![](https://storage.crisp.chat/users/helpdesk/website/-/a/f/d/6/afd6941e8bc7d800/undefined-mar-31-2025-02-31-11_1v99ise.png)

9. At the "IP forwarding" dialog, press <Enter> to confirm.

![](https://storage.crisp.chat/users/helpdesk/website/-/a/f/d/6/afd6941e8bc7d800/undefined-mar-31-2025-02-31-10_15bpot0.png)

10. Reboot the ggRock server with the "shutdown -r now" command.

![](https://storage.crisp.chat/users/helpdesk/website/-/a/f/d/6/afd6941e8bc7d800/undefined-mar-31-2025-02-31-10_7h52s2.png)

11. Once the server boots back up, attempt to boot a Machine again.

![](https://storage.crisp.chat/users/helpdesk/website/-/a/f/d/6/afd6941e8bc7d800/undefined-mar-31-2025-02-31-10_1l0fohl.png)

### **Solution 2**

Check that no devices in your LAN are broadcasting PXE responses, then [re-install Debian](https://help.ggcircuit.com/knowledge/install-debian-os-deprecated) and [ggRock](https://help.ggcircuit.com/knowledge/install-ggrock-deprecated).

Data stored on the arrays will not be affected.

### **Additional Information**

If, for any reason, the IP address of your server changed since the last time ggrock-linux-configurator was run, it will need to be run again in order to update configurations.